Maintenance Shade Sails and Posts at a WTP
Principal:
SEQ Water
Location:
Capalaba Water Treatment Plant
Project Overview
Scope of works included the fabrication and installation new hot dipped galvanised posts from Practical Engineering`s design, that supported the shade sail covers at a water treatment plant.
Replace Shade Sail Posts at a Water Treatment Plant
Overview of Project:
Fabricate and install new shade sail posts at a water treatment plant.
Scope of Works:
Existing posts located on top of the tank walls on 2 x clarifier tanks at a water treatment plant had broken out the concrete and were at risk of falling into the clarifiers.
Neumann Water fabricated and installed new Hot Dipped Galvanised posts from Practical Engineering’s design.
22 posts in total to be installed.
Old posts were removed, and shade sail was reconnected to all the new posts.
VIEW OUR OTHER PROJECTS
Membrane Loading Installation/Replacement
Winch and Trash Screens Installation at Dam
Water Treatment Plants Vermin Proofing
Switchboard Roof Structure at a WTP
Sulphuric Acid Skid Pipe Upgrade and Pressure Test
Protective Coatings Site Painting of GRP Tank
Refurbishment of Intake Screen at a WPS
Temporary Storage Water Tanks at a WTP
Laser Alignment of Rotating Equipment
High Pressure Pump Overhaul at GC WTP
Water Reservoirs Roof Gutters and Stormwater
Wolleebee Creek Northern WTP Heat Exchanger Clean
Gravity Thickener Refurbishment at WWTP
Installation of Fluoride Hopper Shut Off Valves
Repair Filter Outlet Assemblies at a WTP
Installation of Chemical Dosing Skid Cabinets
WTP Centrifuge Overhaul and Service
New Transfer Pump Bypass at Bundamba WPS
